Shopping Bag0 item(s) in cart/ Total: $0
THK-11215-KIT: SOLAR BIPV/THERMAL (PVT) AWNING - ADJUSTABLE ANGLE, (12) THIN FILM BIPV/PV SOLAR MODULES- 1020W SYSTEM - OFF GRID
960W AWNING - (12) PVT MODULES

THK-11215-KIT: SOLAR BIPV/THERMAL (PVT) AWNING - ADJUSTABLE ANGLE, (12) THIN FILM BIPV/PV SOLAR MODULES- 1020W SYSTEM - OFF GRID

On sale$3,595.00
PLEASE ALLOW US TO GIVE YOU TIMING FOR DELIVERY
Part Number:THK-11215-KIT
OUR 100% OFF GRID AWNINGS WITH BOTH ELECTRICAL OUTPUT PLUS THERMAL HEAT GENERATOR.   GREAT PRICE.  

TWO PEOPLE PLUS A PLUMBER IN LESS THAN FOUR HOURS TO INSTALL ON YOUR GARAGE, HOME, OR OFFICE. GREAT FOR SECURITY AND HURRICANE PROTECTION, SINCE YOU CAN LOWER AND CLOSE OVER WINDOWS OR DOORS FOR HIGH LEVEL OF PROTECTION.  

HOOK-UP OF PVT MODULES FOR RADIANT FLOOR HEATING OR HOT WATER, TAKES PLANNING, BOTTOM PREHEAT TANK FOR HOT WATER OR RADIANT HEATING SYSTEM.

DO-IT YOURSELF - BUT, YOU WILL NEED SKILL OF HVAC/HOT WATER SYSTEMS PLUMBER TO MAKE THE PVT FEATURE OPERATIONAL.

CAN OPERATE AS SOLAR PV JUST GREAT WITHOUT USING THERMAL PVT FEATURES... UNTIL YOU HAVE ADDED EQUIPMENT NEEDED FOR THERMAL APPLICATIONS.

EACH SOLAR AWNING KIT INCLUDES:
  • (12) 85-W THIN FILM BIPV CdTe SOLAR MODULES WITH THERMAL COILS FOR PRESSURIZED GLYCOL SYSTEM
    • 85W - U/L LISTED MODULE, 1000V DC RATED SYSTEM
      • PVT MODULES @47 DEGREE C. OPERATING TEMPERATURE, GLYCOL & WATER MIX PRESSURIZED SYSTEM USING COPPER TUBING WITH BRAZED FITTINGS
    • BACKED BY 25-YEAR PERFORMANCE GUARANTEE WRITTEN WITH WELL KNOWN INSURANCE COMPANY, SO RELIABILITY FOR A LONG LIFE IS GUARANTEE ON THESE MODULES INSTALLED ANYPLACE IN THE WORLD.   IF PERFORMANCE OF THE MODULES DROPS BELOW 80% WITHIN 25-YEARS, THEN INSURANCE COMPANY PROVIDES ASSURANCES THAT MANUFACTURER SHALL WRITE A CHECK FOR THE COST OF YOUR LOST SOLAR MODULE EFFICIENCY OR MAY ELECT TO REPLACE DEFECTIVE MODULES AT THEIR COST. 
      • PROOF OF WARRANTY/GUARANTEE BACKED BY  INSURANCE COMPANY AVAILABLE UPON REQUEST
    • AWNING FOOTPRINT:  194" WIDE X 108" DEEP
    • Kit includes solar connectors pre-assembled for quick plug in to activate modules, 1,000W inverter with 110/120V, 60hz output, adjustable black powder coated steel frame for attachment to building structure and aluminum frame for light weight and easy closing and locking in case of emergencies such as hurricane weather.
      • Special order - no additional cost, for inverter designed for your exact power output needs of your property or region of the world.
      • Customer Supplies:
        • PIPE FITTINGS, PIPING, HOT WATER TANK, VALVES, PUMP, OR CONTROLS
        • Customer sources timber locally if specified on drawings for the awning system.   Everything else is provided in the kit.
    • Frame attachment to building structure can be adjusted for slope to the sun, but also width of placement to match up with casements on windows or stud walls. Requires four people to lower or raise the awning.  We advise that you be prepared and enough help when attempting to change awning position to the sun.
    • Recommend setting the inverter to one side of the window on small concrete pad or attach to wall.  Includes weather resistant cabinet with everything pre-wired and tested... Just install batteries and hook up PV stringers before starting up system, being careful to follow all instructions provided and taking great care to prevent harm to you or your property.
    • You must conform to local and safe electrical codes and insure your system is properly grounded.  Modules are rated for 1000V DC, but 600V DC is maximum for residential applications and is limit for our supporting inverter and hardware.
    • Battery storage is available upon request.
    • Lead-time after full payment.  Please allow 45-75 days.    
    • PVT FRAMES - ALUMINUM BLACK POWDER COATED TO MATCH THE BIPV MODULES.
    • SOLAR MODULES ARE U/L,  TUV AND CE RATED.  SOLAR CONNECTORS AND WIRING ARE U/L APPROVED.  THERMAL FEATURE IS CE RATED.
  • IF YOU ARE A TAX PAYING MEMBER OF SOCIETY, THEN YOU CAN EVEN ENJOY SOME FABULOUS TAX BREAKS FROM SOME STATES AND FOR SURE FROM THE FEDERAL GOVERNMENT WHEN YOU FILE YOUR TAX RETURN.

CLICK HERE FOR SPECIFICATION DETAILS:              THK-4300 SPECS


BEFORE YOU CONSIDER INSTALLING SOLAR AWNINGS YOU NEED TO ASSESS YOUR PROPERTY: 
  • IS THERE ANY SHADING IN LOCATION YOU WISH TO INSTALL THE SOLAR AWNING?  TEMPORARY SHADING WITH OUR THIN FILM MODULES WILL BE OK, BUT IS BEST WITHOUT ANY OBSTRUCTIONS.
  • ANY DISTANT MOUNTAINS IN THE HORIZON OR HIGH RISE BUILDINGS AND TREES TO RESTRICT EXPOSED HOURS.
  • WANT YOUR AWNING TO BE EXPOSED DIRECTLY SOUTH, BUT IN HAWAII AND OTHER SOUTHERN REGIONS WHERE THE SUN AND WEATHER CONDITIONS ARE IDEAL AND ELECTRICITY IS VERY EXPENSIVE, PLACEMENT ON EAST AND WEST SIDES OF STRUCTURE IS A WORTHWHILE INVESTMENT.  IN THESE REGIONS, PLACEMENT OF PVT MODULES ON NORTH SLOPES OR HORIZONTAL OR VERTICAL MOUNTING IS VERY EFFECTIVE, BUT NOT AS EFFICIENT AS SOUTHERN EXPOSURE AT EFFICIENT SLOPES.
  • DOWNLOAD, COMPLETE, AND RETURN TO US VIA EMAIL YOUR ENERGY SAVINGS CALCULATOR.  WE CAN HELP CALCULATE THE COST AND POTENTIAL SAVINGS INVOLVED IN YOUR SUSTAINABLE ENERGY PROJECT, GETTING YOU THE GREEN TECHNOLOGY YOU NEED TO MEET YOUR SUSTAINABLE ENERGY GOALS.  DOWNLOAD THE FORM HERE:  ENERGY SAVINGS CALCULATOR


Reward Points

3595 points will be rewarded to you when you buy this item.

Recently Viewed Items